Hugh Courtright Header

Email us at:
sales@right-tape.com

Courtright & Co., silicone, ptfe, uhmw tapes

9000 Series
Heat-Sealing Tapes, PTFE Tapes,
PTFE Coated Fabrics, and
High-Performance Products

heat sealing tapes, ptfe tapes

9010

Premium-Grade Heat-Sealing PTFE Glass Cloth Tape with Silicone Adhesive

PTFE impregnated fiberglass has highest percent of PTFE coating. Fiberglass provides dimensional stability, while extra-heavy coat of PTFE  provides  quick-release surface. Silicone adhesive has good chemical resistance, removes cleanly, and is perfect for extreme temperatures, from -100 degrees Fahrenheit to 500 degrees Fahrenheit (-73 degrees  Celsius to 260 degrees Celsius). These properties make this tape superb for heat-sealing. Available in in thicknesses of 3 Mil, 5 Mil, 6 Mil, 10 Mil, and 14 Mil with liner or without liner.

9020

Standard-Grade Heat-Sealing PTFE ( Cloth Tape with Silicone Adhesive

Similar to Premium-Grade 9010, but with a lower percent of coating, thus affording a cost advantage over the premium-grade heat-sealing tape. Available in thicknesses of  3 Mil, 5 Mil, 6 Mil, and 10 Mil with liner or without liner.

9030

Premium PTFE / Glass Cloth Tape with Acrylic Adhesive

Same as Premium-Grade Heat-Sealing PTFE  Glass Cloth Tape with Silicone Adhesive (Item 9010), but acrylic adhesive operates best in temperature range from -40 degrees Fahrenheit to 375 degrees Fahrenheit (-4 degrees Celsius to 188 degrees Celsius.) The benefit of acrylic adhesives is that they offer superior weathering and age characteristics, and excellent adhesion  to metal. When exposed to increased temperatures, acrylic adhesives offer full coverage or "wet out", and better tack levels. Available in in thicknesses of 3 Mil, 5 Mil, 6 Mil, 10 Mil, with liner or  without liner.

9040

Standard-Grade PTFE Glass Cloth Tape with Acrylic Adhesive

Comparable to premium grade, but with a cost advantage, due to lighter PTFE coating. Available in 3 Mil, 5 Mil, 6 Mil, with liner or without liner.

9050

Skived PTFE Film Pressure-Sensitive Tape

This product is an excellent choice for insulating coils, transformers, and power cables, and for a variety of mechanical uses, including lining chutes, conveyor systems and  guide rails. This product also can be used as a high-temperature tape and gasket material. This product has high dielectric strength, non-stick surface, high-weatherability, conformability, and chemical inertness. It offers conformability and resists high temperatures. Available in silicone or acrylic adhesive in thicknesses of 2 Mil, 3 Mil, 5 Mil, and 10 Mil.

9060

High-Modulus PTFE Film

This product's low elongation and high tensile strength mean it can be applied to automatic wrapping equipment. The High-Modulus PTFE Film can be used in applications where stability, quick-release surface, good chemical resistance, clean removal, and extreme temperatures are considerations because it has all the properties of Premium-Grade Heat-Sealing PTFE Glass Cloth Tape with Silicone Adhesive (Item 9010.) The high-temperature silicone adhesive version of this product is available in thicknesses of 2 Mil, 3 Mil, 5 Mil, and 6 Mil. The high-temperature acrylic adhesive version is  available in 2 Mil only.

9070

UHMW Film Tape

Offers a definite cost advantage when anti-sticking and reduced friction are the primary concerns. Its excellent anti-sticking, abrasion-resistance, and noise-reduction  properties make it ideal for lining chutes, conveyor systems, and guide rails. It also is a natural for easing suface-to-surface wear on the bottoms of chairs and other furniture that are moved by  sliding. This product is less resistant to high-temperature extremes than PTFE products. Acrylic and Rubber adhesives available in thicknesses of 3 Mil, 5 Mil, 10 Mil, and 20 Mil.

9080

Rulon® Film Tape with Silicone Adhesive

Tape's abrasion resistance is superior to conventional PTFE  films. Service temperatures range from -100 degrees Fahrenheit to 500 degrees Fahrenheit (-73 degrees Celsius to 260 degrees Celsius.) During rotating bearing tests, this product provided a 500-fold increase in wear resistance over standard PTFE. In addition to bearings, this product's applications  include chute and guide rail liners. Available in 8-Mil thickness only. An acrylic adhesive version also is available.

9090

Anti-Static PTFE Fiberglass Tape

Used to eliminate severe static electricity problems. Tape provides a quick-release surface, with static-dissipation features. Fiberglass provides dimensional stability, while  special inclusions added into PTFE improve electrical conductivity. Silicone adhesive is available in thicknesses of 3 Mil, 5 Mil, 6 Mil, and 10 Mil.

9095

Kapton® Polyimide Film Tape

Provides the highest temperature performance of our tape line. It also offers superior dielectric strength and excellent tear- and  abrasion-resistance. Silicone adhesive can withstand temperatures above 500 degrees Fahrenheit (260 degrees Celsius) and is designed for clean removal. This product is also available in the "Film Tape" category as item 6220. Kapton Polyimide Film Tape is available in thicknesses of 1.2 Mil and 5 Mil. We also offer a double-coated version of this tape.

9210

Premium-Grade Heat-Sealing PTFE  Glass Fabric

Extra heavy coating of PTFE provides superior non-stick surface for high-temperature heat-sealing applications. Available in thicknesses of 3 Mil, 5 Mil, 6 Mil, 10 Mil, and 14 Mil.

9220

Standard-Grade Heat-Sealing PTFE Glass Fabric

Standard-Grade PTFE coating on glass fabric provides optimum balance of substrate weave, strength, finish, and coating for high-temperature heat-sealing applications.  This product offers a cost advantage over the premium-grade tape.

9230

Food-Belting-Grade PTFE  Glass Fabric

This product performs excellently in harsh food processing conditions, thanks to a special formulation of red PTFE coating on glass fabric. The coating makes this product  extremely resistant to abrasion, oils, and liquids. It complies with FDA and USDA requirements. This product's other applications include food belting, baking sheets, and release sheets for cooking food.

9240

Anti-Static-Grade PTFE Coated Glass Fabric

Provides anti-static surface with electrically conductive characteristics. Black PTFE coating uses carbon or graphite inclusions.

9250

Porous-Grade PTFE Coated Open-Mesh Glass Fabric

Tape porosity enhances drying by allowing warm air to circulate. Porosity also allows volatile gases to escape. Porosity ranges from several microns, up to 1/4 inch (6.33 MM.)

9260

Tear/Crease-Resistant-Grade PTFE Coated Glass Fabric

Adding a standard PTFE coating to specially treated glass fabrics boosts this product's wear- and tear-resistance.

9270

Specialty-Fabrics-Grade

These products include custom-designed materials using fiberglass, Kevlar®, and Nomex® fabrics, with fluoropolymer coating and films. We can supply high-performance sealer belting (e.g. for DoBoy, Hayssen, Ami, etc.) with any of the specialty fabrics-grade products. Please call us with your high-temperature belting requirements.

|About Us| |What’s New| |Contact Us| |Affiliates| |Product Information|

Hugh Courtright & Co. LTD., 26749 South Governors Highway, Monee, IL, 60449.
P. (708) 534-8400 F. (708) 534-9140

Copyright (c) Hugh Courtright & Company, Ltd 2003. All rights reserved.

KEVLAR®, is a  Registered Trademarks of  E.I. du Pont de Nemours and Company